Valvedepot.com : Chaoda Wafer Check Valve

www.valvedepot.com Showroom Catalogue#049410599 BACK

Wafer check valve - Chaoda

.
Discription：In view of the large bulk, high pressure of the water hammer, large resistsance against the fluid of the traditional check valve, our company developed and produced model# H71 & H76 type wafer check valves by absorbing the advanced foreign technology, according to American API, German DIN and our GB standards. The weight is only 1/4 to 1/20 of the traditional flange check valve. The face to face dimensions are only 1/4 to 1/8 of the traditional one. With advanced structure, supreme performance and complete specification, our valves are highly evaluated by our customers and are applied to the lines of petroleum, chemistry, metallurgy, light industry and foodstuff, etc. It was awarded the silver prize at the Fourth Session of China New Technology Products Fair.

Structural features:

Short in face to face dimensions, small in bulk, light in weight;

Valve discs close quickly, the pressure of the water hammer is little;

Applicable to both vertical and horizontal pipes. Simple installation;

Simple, impact structure and nice outline;

Smooth channel and little fluid resistance;

Flexible action and fine sealing;

Prolonged service time and high raliability;

.
Application: Applicable to various pipes of Class150 to 2500, PN1.0 to 42.0MPa, working temperature of -29 to 425 C (carbon steel) -40 to 500C (stainless steel) to prevent opposite flowing of fluids. Different materials of valves can endure many fluids like water, vapour, oil, nitric acid, acetic acid, intense oxidation fluid and urea, etc.

Body materials:WCB, CF8, CF3, CF8M, CF3M, ZG1Cr18Ni9Ti, ZG1Cr18Ni12Mo2Ti
Type of connection: Wafer
.

Standards:
.

Manufacture

Face to face/end to end dimensions

Pipe flange

Pressure- temperature rating

Testing & inspection

API594
API 6D
GB12224

API594
API 6D
GB/T15188.2
DIN3202

ANSI B16.5
GB9112-9131
JB/T74-90
SH3006
HG20615 - 20635

ANSI B16.34

API598

ZBJ16006

Wafer double-disc swing check valve Type H76

Comparison of swing check valve:
YP_10013.jpg (13192 bytes)

cad.GIF (32928 bytes)

Structural style	Model H76 wafer double-disc swing check valve		Model H44 flange single-disc swing check valve
Water hammer pressure	Small, disc has short stroke and valve closing is quick due to spring assistance.		Large. Long stroke of disc. Long closing time is needed.
	The hammer pressure of Model H76 is ony 1/2 to 1/5 that of Model H44
Dimensions & weight	Short face-to-face, small bulk, light weight		Long face-to-face, big bulk and heavy in weight
	The face-to-face of Model H76 is only 1/4 to 1/6 of Model H44. The weight of Model H76 is only 1/4 to 1/10 of Model H44.
Flux resistance	Small. The flux resistance factor is 2.9 -0.9	Small. Flux resistance factor is1.3-3. But the valve disc can't open completely in low pressure system.
Installation	Horizontal or vertical installation. Light weight. Support to the valve is not necessary.	Horizontal or vertical installation. Due to heavy weight of large diameter valve, the support is needed.
Opening pressure	Very small. The disc can be opened at very small pressure balance.	Rather large. The disc can be opened at very largel pressure balance.
Credibility	High reliability. The overall structure of valve receive small impact when the valve closes. The hammer pressure is small.	The strong impact caused by valve closing and hammer pressure can damage valve easily.

Production Scope:
.

Nominal pressure or pressure grade

Nominal diameter DN / NPS(mm / in)

100

125

150

200

250

300

350

400

450

500

600

800

1000

2¹/2

PN1.0MPa

PN1.6MPa

PN2.5MPa

PN4.0MPa

PN6.3MPa

PN10.0MPa

PN16.0MPa

PN20.0MPa

Class150

Class300

Class600

Class900

Class1500

Class2500

Wafer lift check valve Type H71

Comparison of wafer lift check valve:

YP_10014.jpg (9704 bytes)

cad.GIF (37907 bytes)

Structural style	Model H71wafer lift check valve		Model H41flange lift check valve
Water hammer pressure	Very small. Short disc stroke. Delicate disc with elastic assisting closing. face-to-face		Small. Short disc stroke. No spring assisting closing.
Dimensions & weight	Short sface-to-face. Small bulk and light weight.		Long face-to-face. Large bulk and heavy weight.
	The face-to-face of Model H71is only 1/4 to 1/8 of H41. The weight of H71is only 1/7 to 1/20 of H41.
Flux resistance	Rather large. The flux resistance factor is 5:10	Rather large. The flux resistance factor is 15 : 6
Installation	Horizontal or vertical installation. Light weight and easy installation.	Horizontal installation only. The large diameter valve with heavy weight is rather difficult to install.
Opening pressure	Very small. The disc can open at very little pressure balance.	Very small. Due to heavy weight of disc, a certain pressure balance is needed to open the disc.
Credibility	High credibility. Overall structure of valve. Small water hammer pressure.	High credibility. But the valve is made up of body and bonnet.

Product category:
.