Jordan Control Valves
Recommended by www.ValveDepot.com
File# 060256301
|
|
Mark 33: a motor-operated control valve that provides exceptional pressure drop capabilities because the short stroke of the valve's sliding gate seat permits greater utilization of the motor torque output. In 1/4" - 2" sizes in ductile iron, bronze, carbon steel, and stainless steel. |
|
Mark 37: an electrically actuated control valve that provides precision control and superior accuracy, making it ideal for use as the final control element for distributed process, micro-processor based control systems. In 1/4" - 6" sizes in cast iron, ductile iron, bronze, carbon steel, and stainless steel. |
|
|
Mark 39 Series: a motor operated three-way control valve that combines the peformance and excellent shutoff characteristics of the Jordan sliding gate seat with the time-proven quality of the Honeywell industrial motor. Available in 1-1/2" & 2" sizes for diverting or mixing service. |
|
Mark 331/332: electric motor operated control valves that feature exceptionally high capacities in relation to line size. With Cv's up to 70 in a 2" valve, the Mark 331/332 combines the superior accuracy of the sliding gate seat with the heavy-duty Honeywell electric motor for reliable long-term operation. |
|
|
Mark 70: a line of pneumatically-operated diaphragm control valves that combine multiple spring actuators with the precision of Jordan Valve's advanced sliding gate seat for closer control and greter metering accuracy. A selection of actuator sizes covers a wide range of pressures for use on steam, liquid and gas services. |
|
Mark 74: features bellows stem seal technology for full compliance with the most stringent requirements of the Clean Air Act. The Mark 74 controls fugitive emissions while reducing the risks associated with toxic, corrosive, explosive, and high temperature fluids. In 1/2" through 2" line sizes with threaded, union, or flanged end connections. |
|
|
Mark 76: a low profile, lightweight on/off control valve. With the short stroke of the sliding gate seat, the Mark 76 has an exceptional life expectancy, and in tests, has exceeded 10 million cycles with no visible wear on the diaphragm. In 1/2" through 6" sizes in cast iron, ductile iron, bronze, carbon steel, and stainless steel. |
|
Mark 78: a globe style pneumatic control valve designed for accurate performance and simplified maintenance, the Mark 78 is used on both process control and secondary applications. Features top entry cage design which allows the body to remain in-line while the seat, actuator, and bonnet assembly can be removed for inspection. |
|
|
Mark 79: pneumatic control valves that feature a three-way body design for use on diverting service as a bypass valve or for combining fluids as a mixing valve. In 1-1/2", 2" and 3" line sizes in carbon steel or stainless steel. |
|
Mark 701/702: a high flow version of the Mark 70 pneumatic control valve, the Mark 701/702 is used for higher capacity requirements with Cv's up to 70 in a 2" valve. For use on steam, water, oil, gas, air and chemicals. |
|
|
Mark 711: linear control valves in sizes up to 6" with Cv's to 395. Produced in cast iron, ductile iron, bronze, carbon steel, and stainless steel for use on steam, water, oil, gas, air and chemicals. |
|
V1 Series: cage-guided balanced trim control valves that offer high pressures and tight shutoff with the use of standard spring/diaphragm actuators. In sizes up to 6" with threaded, socket weld, or flanged ends. A full range of accessories, including smart positioners can be specified with the V1. |
Note: Request
quotation for valves must use our Inquiry System.
You will not get reply for pricing if just using direct email.
Ask Price of Valves click
www.VALVE123.com (go Step #2)
or Contact us for other issues