Jordan Low Flow Control Valves
Recommended  by       File# 060356301

708.gif - 2742 Bytes

Mark 708: pneumatic control valves in 1/4", 1/2" AND 3/4" sizes that weigh as little as 2-7/8 pounds. With flow control in the micro-Cv range, the Mark 708 is produced in a variety of materials including Carbon Steel, Stainless Steel, Hastelloy B & C, Alloy 20, Monel, and Titanium.

708mv.GIF - 27717 Bytes

Mark 708MV: a compact, lightweight electronic control valve that features a continuous duty bi-directional rotary actuator with built-in servo amplifier. In 1/4", 1/2" and 3/4" sizes.

708qc.GIF - 3887 Bytes

Mark 708QC: for applications requiring frequent trim changes, this option allows you to quickly and easily change the trim set without recalibrating or disturbing the actuator setting.

708bs.GIF - 8916 Bytes

Mark 708BS: lightweight, compact control valves with bellows stem seal for dependable leakage protection where tight containment of service fluid is desired. Full compliance with Clean Air Act.

708dp.GIF - 2762 Bytes

Mark 708 Double Packed: an alternative to bellows stem seals, this optional bonnet is used when standard packing will not adequately contain the controlled media, yet tighter containment is desired.

708cry.GIF - 7911 Bytes

Mark 708 Cryogenic: an 8" bonnet extension that provides protection for the packing and actuator by preventing ice build-up, which can interfere with movement of the valve stem and affect valve performance. For services with temperatures as low as -425蚌.

708fin.GIF - 2697 Bytes

Mark 708 Finned: the finned bonnet keeps the area around the packing cooler to reduce the effects of high temperatures on packing life. Enables the use of standard packing materials that generally would not be suited to services with elevated temperatures.

709.gif - 4425 Bytes

Mark 709 Three-Way Valve: for low flow process applications requiring a three way body for mixing two separate flow sources into one common line. Compact, lightweight design for precise control in pilot plants, R&D facilities, and low flow process applications.

8000.gif - 4051 Bytes

Series 8000: heavy-duty pneumatic control valves for process applications with flow requirements from Cv 0.05 to 25. Available in both exotic alloys and thermoplastics in 1/2" through 2" sizes.

80003way.GIF - 3182 Bytes

Series 8000 Three-Way: features a three-way body for varied uses: mixing two separate flow sources into one common line; diverging a single flow path into two separate streams; or as a bypass to divert flow from one outlet to another.

8000bs.gif - 2866 Bytes

Series 8000BS: features a bellows stem seal for dependable leakage protection where tight containment of service fluid is desired. Ideal for corrosive services, it is available with bodies and trim in exotic alloys including Monel, Hastelloy, and Alloy 20.

8000cry.GIF - 2439 Bytes

Series 8000 Cryogenic: the cryogenic option provides an extended bonnet that isolates the valve stem and actuator from service conditions that could have an adverse effect on valve performance and control.

Return to Home PageReturn to Main Screen  


 Note: Request quotation for valves must use our Inquiry System.
You will not get reply for pricing if just using direct email.

 Ask Price of Valves click (go Step #2)

or Contact us   for other issues