Jordan Pressure Regulators
Recommended by www.ValveDepot.com File# 060456301
|
Mark 60 Series: a line of self-operated pressure regulators that require no external power or instrumentation for operation. Feature unique sliding gate seat design for fast response, accurate control, and quiet operation. In sizes 1/4" - 4" in ductile iron, bronze, carbon steel, stainless steel, and exotic alloys including Monel, Alloy 20, Hastelloy, and Titanium. |
|
Mark 62: features an internal pilot in a compact body design for greater accuracy and lower offset than can be attained from a self-operated valve. Available in ductile iron or bronze with threaded (NPT, BSPT, BSPP) or flanged ends. Produced in sizes 1/2" through 2" for use on steam, oil, gas, and chemical services. |
|
Mark 63 Series: differential pressure regulators used to maintain a constant differential between the pressure on the discharge side of the regulator and the signal pressure loaded on the diaphragm. Available with flow-thru spring housing for use in controlling atomizing steam or air to oil burners. 1/4" through 2" sizes. |
|
Mark 65: vacuum regulators for accurate control and tight shutoff for maintaining the proper vacuum setting on evaporators, cookers, grinding fixtures, milking machines, altitude chambers and other vacuum systems. The Mark 65 is available in 1/2" through 2" sizes with threaded or flanged connections. |
|
Mark 66: Air loaded regulators that provide accurate regulation from a local station or remote position. The set point is controlled by adjusting the air pressure that is supplied to the top of the diaphragm. In sizes 1/2" through 6" with threaded or flanged ends. |
|
Mark 67: an externally piloted pressure regulator that provides exceptional accuracy for services with set points ranging from 10 psi to 150 psi. In 1/2 through 6" sizes with threaded or flanged ends, the Mark 67 is available in Cast Iron, Ductile Iron, Carbon Steel and Stainless Steel. |
|
Mark 68: |
|
Mark 68HP: A heavy duty globe style regulator designed primarily for high pressure steam service as commonly found in power plants, refineries, pulp & paper mills, and other high pressure applications. For services with inlet pressures to 900 psi and outlet set pressures to 600 psi. In 1/2", 3/4" and 1" sizes in WCB Carbon Steel or CF8M Stainless Steel. |
|
Mark 601/602: A high flow version of our Mark 60 self-operated pressure regulator, the Mark 601/602 is available in 1-1/2" & 2" sizes with Cv's to 70. Produced in Ductile Iron, Bronze, Carbon Steel and Stainless Steel. |
|
Mark 608: A self-contained low pressure regulator for use on tank blanketing, gas meter inlet pressure regulating, gas burners, and other low pressure air and gas applications. Regulates down to 1" w.c. with inlets to 150 psi. |
|
Mark 618: A pressure regulating valve for low pressure liquid and gas services with set points as low as 1" w.c. Completely self-operated, the Mark 618, operates off the line pressure and requires no external power source or air supply for operation. |
|
Mark 6800HP: A line of self-operated pressure regulators for use on high pressure industrial gas and liquid services to 4,000 psi. Features exceptional accuracy with high flow capacities and simple in-line maintainability. In 1/2", 3/4" and 1" sizes. |
Note: Request
quotation for valves must use our Inquiry System.
You will not get reply for pricing if just using direct email.
Ask Price of Valves click
www.VALVE123.com (go Step #2)