Jordan Sanitary Valves
Recommended  by    File# 0604563012

Maintaining sanitary conditions is critical to the sanitary process, and as such, your valves and piping components must adhere to your strict standards.

Jordan Valve understands these special needs and has developed the STERIFLOW line to make it easier for you to adhere to your stringent maintenance procedures. STERIFLOW products meet FDA and 3A requirements and are designed with your sanitary system requirements in mind:

  • Self-draining design insures that no fluid collects in the body, which could become a source of contamination.
  • Stainless steel construction, polished components -- the interior of the body is mechanically polished to 20 ra and then electropolished.
  • No guiding surfaces in the fluid -- prevents particulate generation.
  • No threads in contact with the service media -- prevents accumulation of contaminants.
  • Easy to disassemble and reassemble -- simplifies cleaning and maintenance procedures.
  • Clean-in-place/steam-in-place capabilities -- PRV dome features lock-open device for easy CIP/SIP.



Mark 92 Sanitary Steam Trap: is a thermostatic steam trap in 316L Stainless Steel that are specifically designed for clean steam systems. In sizes 1/2", 3/4", 1".


Mark 93 Sanitary Steam Trap is a line of thermostatic steam traps in 316L Stainless Steel that is full open during start up, giving excellent venting and condensate removal characteristics. In sizes 1/2", 3/4", 1".





95.jpg - 2832 Bytes

Mark 95 Back Pressure Regulator: for use in maintaining the back pressure on sterilizers, clean steam generators, WFI pumps, bioreactors, and other process equipment. In sizes 3/4", 1", 1-1/2", 2" & 3".

96.jpg - 3176 Bytes

Mark 96 Sanitary Pressure Regulator: designed to maintain a precise pressure setpoint, while enabling you to maintain sanitary process conditions. In 3/4" through 3" sizes, with hard or soft seats, the Mark 96 features easy clean-in-place, steam-in-place capabilities.


Mark 97 Sanitary Control Valve: for critical control requirements, the Mark 97 can maintain high accuracy levels on pressure, temperature, flow, PH, level or other process variables. Conforms to 3-A sanitary standards #53-00.

mk98.GIF - 11145 Bytes

Mark 98 Diaphragm Seal Control Valve: a modulating control valve with pneumatic actuator and high flow capabilities for use on sanitary steam, gas and liquid services for pharmaceutical, food, beverage, biotech, and other sanitary process applications.

Return to Home PageReturn to Main Screen  


Note: Request quotation for valves must use our Inquiry System.
You will not get reply for pricing if just using direct email.

 Ask Price of Valves click (go Step #2)